Pinpoint Aquarium Monitors and Controllers by American Marine

Pinpoint PH Controller

PINPOINT pH Controller™ is an inexpensive yet rugged controller, which includes the appropriate probe and calibration fluids. This device will automate another electrical device such as a calcium reactor or magnetic solenoid for the addition of CO2 into an aquaculture or process system, and will control pH in both a downward and upward direction. The user will select his or her own setpoint and any range of acceptable pH around this setpoint. This full featured controller will handle up to 5.0 amps at 110 VAC. A 220 VAC version is also available.

Pinpoint ORP Controller

PINPOINT ORP (REDOX) Controller™ is an inexpensive rugged controller complete with a platinum ORP probe. This device will automate another electrical device like an ozonizer or ozone generator. This full featured controller will accommodate an electrical device up to 5.0 amps at 110 VAC. A 220 VAC version is also available.

Pinpoint 15 foot PH/ORP extension cable

PINPOINT® 15 foot extension cable for the pH or the ORP/REDOX probe. This will add an additional 15 feet onto the 10 feet of the probe cable for a total of 25 feet. This extension cable will fit any probe with a standard BNC connector.

Pinpoint Temperature Controller

®Temperature Controller is an inexpensive but rugged controller that can be used for a chiller or a heater; or both a chiller and a heater. Fully programmable setpoints. Farenheit only readout and resolution to 1/10 of a degree, e.g. 78.6 F, make this an easy choice for larger reef systems. Available 110VAC only.

Pinpoint Salinity Monitor™

PINPOINT Salinity Monitor™ will accurately and immediately measure the amount of salt in any marine or freshwater system. The reading is fully temperature compensated, which is difficult or impossible with nearly any commercial hydrometer. The conversion chart will precisely show the corresponding density (specific gravity) or % salt (refractometer) values. This monitor is especially useful to determine the low level of salt required for Koi, whether in an aquarium or outdoor pond.

Pinpoint Calcium Monitor™

The PINPOINT® II Calcium Monitor is the only truly affordable and accurate digital Calcium measurement instrument for marine saltwater. Powered by a 9-volt battery (not included), the PINPOINT® II Calcium Monitor will operate for approximately 150 total hours before battery replacement is visually indicated on the display. The PINPOINT® II Calcium Monitor now features a solid state probe for increased stability, accuracy and longer life. Calibration is fast, easy and precise. Generally used as a precision spot testing instrument with possible continuous monitoring capabilities. The PINPOINT® II Calcium Monitor will precisely determine the calcium level of any marine system.